Features: 
 ● insertion electromagnetic flowmeter pipe flow detection in large, easy to install, no stop, field hot tapping, the installation has the absolute advantage and price advantage. 
 ● Suitable for water, sewage, acid, alkali and other electrical conductivity in the 5μs/cm, above the liquid flow detection, the change does not affect the conductivity change in performance, highly adapted to the complex changes in the fluid. Especially suitable for measuring the flow of drainage channels. 
 ● flow without mechanical moving parts, the converter optimized design, compact structure, easy electrical installation, converters and sensors interchangeable, are free to change the measuring range (0.5m / s ~ 10m / s). 
 ● Measurement of flow only into the depth, so that the flow meter wide versatility, interchangeability. A model can be applied to a variety of pipeline flow measurement requirements. 
 ● Design has a wealth of output interface can connect with any standard secondary instrument to display the cumulative or adjust the flow. 
 a) 4-20mA Current output; 
 b) can be set to pulse output; 
 c) RS485 interface. 
 ● five sections of the sensor provides linear correction. 
 ● Automatic operation with the mean flow features, ease of instrument calibration. 
 ● damping function. The setting range is 0-40S (middle arbitrary integer). 
 ● automatic range switching. Wide range of flow meter in fluid volume changes, the range can automatically switch to ensure accurate measurement of full scale. 
 ● reverse the flow of computing power. Users can choose forward or reverse metering metering (default is a positive measure.) 
 ● on the lower limit alarm. Users can set the upper and lower limits based on the actual needs of the instantaneous flow, when the flow over the upper limit or below the lower limit or when the buzzer alarm relay output (user selectable). 
 ● ATC judge. In operation, the air tube when the flow meter tube, the instantaneous flow is displayed as EPo. 
 ● power protection, flow meter operation results and the parameters set by the user after a power outage will not disappear, EEPROM set the parameters and to protect the accumulated value. 
 ● Small Signal removal function. Users can set lower panel voltage and lower flow, small signal interference to cut traffic. 
 ● instrumentation "automatic zero" principle, to eliminate electrochemical interference signal, zero self-stabilizing. 
 ● password latch function. Meter is powered, if you need to set parameters, you must enter a password to the four parameter settings, independent of personnel changes to effectively prevent the instrument parameters. (Note: The factory set password: 0000). 
 ● converter, and sensors with a variety of protection and installation, there are installed for dive IP68 rating.